TEL: +86-18640063763

Analysis of Structure and Wearing Design of Square Shield KN95 Mask and KN100 Half Mask

Nov,16,2026 << Return list

Fangdun's product line revolves around two protection levels, KN95 and KN100, covering two types of forms: disposable masks and replaceable filter material half masks. The core idea is to prioritize wearing resistance, fit, and convenience of consumable replacement while meeting the national standard filtration efficiency.

1-4-3.jpg

Disposable mask: KN95 grade, three-layer structure and low resistance design

Taking F9501 and other foldable models as an example, the mask adopts a three-layer structure: the outer layer of non-woven fabric intercepts large particles of dust and maintains a firm surface layer, the middle layer of melt blown filter material undertakes the core filtering function, and the inner layer of skin friendly non-woven fabric is close to the face and takes into account moisture absorption. The filtration efficiency meets the GB 2626-2019 standard, with a filtration efficiency of not less than 95% for non oily particles, and can cover particles ≤ 0.3 microns. In terms of wearing details, the nylon ultra soft ear strap, combined with 3D cutting and adjustable nose bridge strip, aims to reduce the pressure and displacement during long-term work. The direction of Fang Dun's repeated adjustments in this series is more specific: while meeting the filtration efficiency standards, it also controls respiratory resistance, so that the mask will not be frequently removed due to stuffiness during a shift; The headband is elastic and the hook position is adjustable, making it less likely to slip off when carrying with the head down; The nose clip is a bendable metal strip, and when pressed from the middle of the nose bridge to both sides, the fogging of the glasses can be improved.

1-4-5.jpg

Half face mask series: KN100 grade and replaceable filter material

The KN100 half face mask (such as 1105, 7200B, etc.) increases the protection level to a filtration efficiency of ≥ 99.97% for 0.075 micron ultrafine non oily particles, suitable for continuous high dust conditions such as coal mining, polishing, and painting. The cover body often uses food grade liquid silicone, combined with ergonomic design, to fit the Asian face shape, providing a tight and comfortable fit that is not prone to aging. The grille style large air intake of the 7100F single filter element half mask covers about 70% of the filter cotton clip. Compared with the small air intake design, the air intake area is more sufficient, which helps to reduce suction resistance. The 45 ° knob structure at the interface eliminates the tedious process of pressing and aligning the cotton filter holder during disassembly and assembly; The design of the sealing ring for the connection port has been supplemented to address the issue of air leakage in some face masks on the market. The cotton filter clip is made of ABS material, which is impact resistant and corrosion-resistant. The adjustable soft head frame is suitable for various head circumferences, reducing head pressure.

2-24-7.jpg

Selection and usage suggestions

KN95 disposable mask is suitable for daily dust prevention, haze prevention, and mild dust environments; The KN100 half face mask is designed for high concentration industrial dust scenarios, with replaceable filter cotton or filter cartridges, and the cost of consumables for long-term use is relatively controllable. Four points can be referred to for signal replacement: filter material getting damp, mask deformation or damage, appearance of odor, and significant increase in respiratory resistance. When storing, avoid hanging it around the neck or stuffing it into a pocket, as squeezing and oil stains can affect the condition of the filter material.