A common phenomenon in welding protection is that many welders choose KP100 disposable masks for cabin operations, but even after removing them, they can still smell a metallic burnt smell, leading to doubts about the quality of the masks. The problem often lies not in the insufficient level, but in the confusion between welding fumes and harmful welding gases.

KP100 is good at intercepting particulate matter, but for molecular level gases such as ozone and nitrogen oxides, relying solely on filter cotton for physical interception cannot adsorb or eliminate odors. Let's first see what KP100 can do. The arc temperature of electric welding can reach 4000 ℃~6000 ℃. After the electrode coating and base material evaporate and oxidize, ultrafine metal dust particles with particle sizes as small as 0.01~0.1 microns will be formed, such as iron oxide, manganese, silicon, etc. Some processes are also accompanied by oil mist generated by oily flux.

According to GB 2626-2019, KP100 has a filtration efficiency of ≥ 99.97% for non oily particles above 0.075 microns and oily particles above 0.185 microns, and has a good interception effect on ultrafine metal particles and oil mist in welding fumes; Compared to the KN series that only targets non oily particles, the KP series provides more targeted protection for oily particles. Outdoor ventilation is good, short-term low-carbon steel welding, optional KP95/KP100 disposable masks with activated carbon odor reduction layer, or KN100 activated carbon models, pay attention to the tight fit of the nose clip.

For regular workshops, enclosed spaces, or long-term operations, Fangdun silicone replaceable half face masks can be considered, paired with activated carbon filter cartridges and front KP100/KN100 anti particle filter cotton to form a combination of particle and irritant gas protection. Perform a negative pressure test before wearing to confirm facial tightness; The filter box and filter cotton will gradually saturate with the concentration of pollution, and if resistance increases or odor is detected, they should be replaced in a timely manner. Ordinary cotton masks and gauze masks without melt blown layers are not recommended for welding smoke protection.
English



